Prestige Dental Products
Toll Free: 877-772-3888
Cart is empty Shop by Manufacturer Top Categories
Veterinary Supplies Medical Supplies Dental Products Quick Order Home
Product name
Mfg. part #
Item No.



Aquacut Quattro, Air Abrasion System (Velopex)

Aquacut Quattro, Air Abrasion System (Velopex)

Aquacut Quattro Unit, Air Abrasion System (Velopex Mfg Part # : QUATTRO)

The AQUACUT’s unique fluid curtain suppresses the powder emissions common with air abrasion units from the past,
while simultaneously increasing cutting efficiency by constantly removing debris created during the cutting process.
The use of fluid reduces the need for high air pressure levels, thereby increasing patient comfort.
So how is it used? … When your patient sits down in the dental chair, you are able to perform a fast and effective cleaning of the oral area.
This will present you with a clearer indication of the patient’s dental condition.
At the turn of a switch, the AQUACUT changes into a powerful cutting tool that will in many instances cancel the need to use the dental turbine.
It is a non-contact instrument, there is no vibration, heat generation or turbine noise. most cases there is no need for an anesthetic.

The Aquacut Quattro is a unique new patented generation of cutting tool, taking the original concept of air brasion and with the addition of fluid, creating Aquabrasion, a far more efficient and gentle technology. Besides functioning as a cutting tool, the Aquacut also cleans,polishes and dries.

 

Advantages of the Aquacut Quattro:

  • Conservative, tooth-friendly dentistry. No chipping or stress fractures,
    and minimal removal sound tooth material
  • Quick and versatile – reduced treatment times
  • Multiple quadrants treatable on a single visit
  • A must for modern adhesive dental techniques
  • Ability to cut, polish, clean and dry
  • Incorporates advanced patented technology

POWDER MANAGEMENT SYSTEM

Sealed, self-contained disposable powder cartridges allow quick and measured refills. An inbuilt feed system insures there is zero maintenance in this critical area as the cartridges can simply be removed and replaced. This system also allows for a quick change between powder grades. Powders are available in 53 micron (red cartridge) and 29 micron (blue cartridge) of Aluminum Oxide for cutting or a Sodium Bicarbonate powder  (clear cartridge) for cleaning and polishing. 


HANDPIECES

With performance in mind, the ergonomic design allows for comfortable operation in the hand and mouth without sacrificing accuracy or control. The low resistance nozzle and long-life tungsten tip ensures the handpiece is a high performance precision instrument. The Autoclave-safe handpiece is made more versatile with a quick release system and comes in two tip sizes: I/ASS8090A - BLUE 0.5MM, I/ASS8092A - GOLD 0.8MM, I/ASS8089A - GREEN 0.4MM and I/ASS8091A - SILVER 0.6MM

 

Air pressure and powder levels are quickly calibrated through a simple-to-use control panel and a powder selection switch allows instant change from cutting to polishing.
The unique foot control enables the operator to choose instantly any function, enabling all procedures to be carried out through a SINGLE handpiece, thus speeding up treatment and reducing fatigue.

 

AQUACUT QUATTRO SPECIFICATIONS


External Supplies: Clean, dry, compressed air, 6 bar (90psi) minimum, 7.5 bar (110psi) maximum. Inlet air supply connection Ø 4mm push-in fitting.

Foot Control: Three-way multi-functional foot valve for cut, wash and dry control. 2m (6ft), three-core pneumatic supply tube.


Output Pressure: Infinitely variable cutting/polishing air pressure between 0 - 7 bar (100psi), controllable via rotating switch and
pressure gauge.

Cutting Media: 53 and 29 micron Aluminium Oxide. Powder rate infinitely variable between 0 and 6g / min (0.2oz) via rotating switch and pressure gauge.

Polishing Medium: Sodium Bicarbonate.


Handpiece: Anodised Aluminium with separate integral powder and fluid channels (both operated by foot control). Nozzles made from stainless steel tube with Tungsten Carbide tip. Handpieces incorporate quick release system for convenient changeover of cutting sizes.

Color coded handpieces for simple tip-size identification:

Silver - 0.6mm (supplied with the Aquacut QUATTRO)
Purple - 0.3mm (optional extra)
Green - 0.4mm (optional extra)
Blue - 0.5mm (optional extra)
Gold - 0.8mm (optional extra)

 

Aquacut Quattro Brochure

 

Aquacut Quattro Demonstration Video

Item No. Description Mfg. part # Price Qty
11-11118
Unit
I/MAC8500F $3,394.95
$5,895.00
save 42%
11-11117
Powder 4-Pack 29 Micron
I/PDR8025F $38.95
 
11-11116
Powder 4-Pack 53 Micron
I/PDR8035F $38.95
 
11-11115
Powder 4-Pack Sodium/Bicarbonate
I/PDR8015F $38.95
 
11-11114
Powder Kit, 6-packs, 2 of each
I/FIT8045F $58.99
 
11-11113
Replacement Tip Blue, 0.5mm
I/ASS8190A $198.95
 
11-11111
Replacement Tip Gold, 0.8mm
I/ASS8192A $198.95
 
11-11112
Replacement Tip Green, 0.4mm
I/ASS8189A $198.95
 

Related Products
Zephyr 150 Mamba Compressor (Velopex)
Zephyr 150 Mamba Compressor (Velopex)

Special offers

Special offers

Prestige Dental Products allows you to earn Rewards on all purchases with nospending caps

Learn More about your Reward Program.

This item: Aquacut Quattro, Air Abrasion System (Velopex) [1 item(s)]
Price for all: $3,394.95